|
 |
|
|
|
|
|
|
|
| |
|
|
| |
 |
|
|
 |
|
 |
|
|
|
| We
utilize Taylor components for all of our custom wire sets. Our wire sets
are built for a perfect fit when using our valve covers and coil packs.
No need to cut, terminate, or assemble. Just plug them on and be done
with it. We use Taylor Hemi ends and shrink sleeve them to your choice
of 8mm or 10.4mm "409" Spirowound wire. If you are using our
plug well covers we will install them for you before terminating your
wires. If you are using firewall mounted coils we offer all the pieces
necessary to assemble your wires to the correct length with the plug ends
terminated. |
|
|
"409"s are simply the best high-tech spark plug wires available,
bar none. A tightly woven-heat treated fiberglass braid is applied over
100% pure silicone 8mm ignition wire. Then, a .409" diameter silicone
jacket is extruded on top, so that there are no wrinkles or loose, bulky
sleeving to collect and hold moisture. This makes for easier wire routing
and gives a cleaner, detailed look to the engine. With their large smooth
jackets, these wires not only perform great but really set off your engine
compartment. |
|
 |
|
|
- .409 inch
(10.4mm) diameter
- 600°F
of heat protection
- Sleeving
is extruded directly over wire - no extra sleeving required
- 102,000
volts dielectric strength
- 3 layers
of silicone
- Tightly
woven, heat treated fiberglass braid
- Vibration
proof double spring locking spark plug terminals
|
|
|
 |
|
|
| |
Part
# |
Description |
Price |
1-118 |
"409"
Ignition Wires 10.4mm Black Assembled |
189.97 |
1-119 |
"409"
Ignition Wires 10.4mm Red Assembled |
189.97 |
1-120 |
"409"
Ignition Wires 10.4mm Blue Assembled |
189.97 |
1-131 |
"409"
Ignition Wires 10.4mm Black Unassembled |
189.97 |
1-132 |
"409"
Ignition Wires 10.4mm Red Unassembled |
189.97 |
1-133 |
"409"
Ignition Wires 10.4mm Blue Unassembled |
189.97 |
|
|
|
| |
|
| |
 |
|
| |
|
|
|
| |
Taylor's Spiro-Pro outperforms the competition in both looks and performance
at a price
you can afford. Spiro-Pro is "the choice" for the street or
track. It simply is the best high performance 8mm wire you can buy.
Taylor's Spiro-Wound conductor consists of a high conductivity resistor
conductor spiral wound with stainless steel wire and covered with a
conductive fluorocarbon material. Spiro-Pro wires provide more fire
power to the spark plugs than OEM resistor core wires and still eliminate
RFI which can interfere with electronic ignitions, computer electronics,
cellular phones and stereo systems. This wire is a must if
you are using a multiple spark discharge ignition system. Two layers
of 100% pure silicone make for the highest temperature rated wire on
the market (600°F) without need for
additional sleeving. We offer these wires in custom fit sets for our
valve covers. Check the list below.
- Maximum fire
power without radio interference
- Provides up to
10 times less resistance than standard resistor core wire
- A must for electronic
ignitions, on board computers, stereos and pit radios
- 100% silicone
inner and outer jacket provides heat protection up to 600°F
|
|
|
|
 |
|
| |
|
|
| |
| Part
# |
Description |
Price |
| 1-121 |
Taylor
8mm Spiro Pro Ignition Wires Custom Fit Assembled Black |
145.95 |
| 1-122 |
Taylor
8mm Spiro Pro Ignition Wires Custom Fit Assembled Purple |
145.95 |
| 1-123 |
Taylor
8mm Spiro Pro Ignition Wires Custom Fit Assembled Red |
145.95 |
| 1-124 |
Taylor
8mm Spiro Pro Ignition Wires Custom Fit Assembled Yellow |
145.95 |
| 1-125 |
Taylor
8mm Spiro Pro Ignition Wires Custom Fit Assembled Blue |
145.95 |
| 1-126 |
Taylor
8mm Spiro Pro Ignition Wires Custom Fit Assembled Teal |
145.95 |
| 1-127 |
Taylor
8mm Spiro Pro Ignition Wires Custom Fit Assembled Orange |
145.95 |
| 1-128 |
Taylor
8mm Spiro Pro Ignition Wires Unassembled Black |
145.95 |
| 1-129 |
Taylor
8mm Spiro Pro Ignition Wires Unassembled Purple |
145.95 |
| 1-130 |
Taylor
8mm Spiro Pro Ignition Wires Unassembled Red |
145.95 |
| 1-134 |
Taylor
8mm Spiro Pro Ignition Wires Unassembled Yellow |
145.95 |
| 1-135 |
Taylor
8mm Spiro Pro Ignition Wires Unassembled Blue |
145.95 |
| 1-136 |
Taylor
8mm Spiro Pro Ignition Wires Unassembled Teal |
145.95 |
| 1-137 |
Taylor
8mm Spiro Pro Ignition Wires Unassembled Orange |
145.95 |
|
|
|
| |
|
|
|
|
|
| |
|
| |
These
Clamp Style Wire Separators are exactly what's needed to produce a professional
looking wire installation. Check the features below:
- Separates, organizes,
and supports ignition wires
- Molded from non-conductive
type 6/6 nylon
- Will not melt,
mar, distort, crack, or fade
- Your choice of
3 colors
- Available for
7-8mm and "409" 10.4mm wire sizes
- Stainless steel
hardware
|
|
|
 |
|
| |
Each
kit contains: 2 ea. - 4 wire separators
2
ea. - 3 wire separators
2
ea. - 2 wire separators |
|
|
|
|
| |
| Part
# |
Description |
Price
|
5-42700 |
Clamp
Style Wire Separator 7-8mm Black |
18.79 |
5-42720 |
Clamp
Style Wire Separator 7-8mm Red |
18.79 |
5-42760 |
Clamp
Style Wire Separator 7-8mm Blue |
18.79 |
5-42709 |
Clamp
Style Wire Separator 10.4mm "409" Black |
22.99 |
5-42729 |
Clamp
Style Wire Separator 10.4mm "409" Red |
21.99 |
5-42769 |
Clamp
Style Wire Separator 10.4mm "409" Blue |
21.99 |
|
|
|
| |
|
|
|
| |
|
| |
These
"T" clip wire separators are inexpensive and provide for a
clean wire installation.
- Secures 2 "409"
Pro Race Wires
- Easy installation
- Inexpensive way
to provide neat and professional looking routing
- 4 "T"
clips per package
|
 |
|
| |
Part
# |
Description |
Price |
5-42609 |
Taylor
"T" Clip "409 " Separators |
10.69 |
|
|
|
| |
|
|
|
| |
|
| |
These
clip on wire markers will make sure that you don't end up with your
ignition wires crossed.
- Fits all 7-8mm
& 10.4mm ignition wires
- White nylon clips
with black numbers
- 2 sets of numbered
clips, 1 through 8
|
|
|
| |
Part
# |
Description |
Price |
5-41060 |
7-8mm
Wire Markers |
7.79 |
5-41065 |
10.4mm
"409" Wire Markers |
9.59 |
|
|
|
|
| |
|
|
| |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
